iNeedSell.com: Free online ads. Post your Ad here.

Minggu, 19 September 2010

Assalamu'alaikum wr.wb..

Salam sejahtera buat kita semua...
mungkin ada yang mau coba sambil berinternet kita mencoba mendapatkan dana tunai?
sebuah usaha dimana kita akan mendapat bayaran/upah iklan dari setiap klik yang kita lakukan
pada aktifitas ber internet...

yah lumayanlah iseng-iseng,
siapa tahu rejeki itu mampir kekita.. sudah banyak yang membuktikannya..
ohya, link ini gratis, bahkan kita dapet free $3 saat membuka account.. oke itu aja selamat mencoba..
dan langsung aja luncur kelink berikut...

klik aja deh link nya:
http://www.bigextracash.com/aft/f06ca386/11110055.html

Wassalam,
rahmad awaluddin

Sabtu, 04 September 2010

ERROR CODE DAN RESET CANON MP145, MP160

ERROR CODE DAN RESET CANON MP145, MP160

ERROR CODE CANON MP145/MP160 :

E2-2 = tidak ada kertas (ASF)
E3-3 = Paper jam
E4 = tidak ada tinta/cartridge
E5-5 = ink cartridges tidak terpasang atau cartirdge yang terpasang salah (tidak compatibel)
E8 = absorber full, atau platen waste ink absorber full mita direset
E9 = hubungan ke digital camera / video camera tidak support
E14 = Ink cartridges whose destination are wrong
E15 = Ink cartridge tidak terpasang E16 - Ink remaining is unknown
E16 -E19 = masalah pada scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error (bagian pompa cleaning head)
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = ink absorber full or platen waste ink absorber full > reset dengan toolsnya
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = motor driver tidak normal
E40 20 = hardware lain error
E42 22 = Scanner error

CARA MERESET WASTE INK COUNTER CANON MP160/MP145
Sebelum mereset lihat dulu pesan error yang terdapat pada lcd printer anda :
cara dibawah ini digunakan untuk memperbaiki printer yang mempunyai pesan ERROR E27

1. Matikan printer(pastikan kabel power masih terpasang), tekan dan tahan tombol STOP/RESET kemudian tekan dan tahan tombol ON/OFF dan lepas STOP/RESET,
kemudian tekan tombol STOP/RESET 2x
2. Lepaskan kedua tombol, sekarang printer dalam posisi SERVICE MODE (pada LCD printer muncul angka"0")
3. Setelah lampu on/off berwarna hijau, silahkan tekan tombol STOP/RESET sesuai dengan petunjuk berikut:
di tekan 1x = lampu Orange nyala >untuk Service pattern print
di tekan 2x = lampu Hijau nyala >untuk EEPROM print
di tekan 3x = lampu Orange nyala >untuk EEPROM reset
di tekan 4x = Lampu Hijau Nyala >untuk Waste ink counter reset
4. Matikan printer dan cabut kabel POWER.
5. Hidupkan kembali printer anda

mau nyoba cara cari uang mudah???

Sabtu, 14 Agustus 2010

SETTING MODEm GPRS/GSM/CDMA

A. Setting Umum

Modem Installation

Langkah 1

Start – Control Panel > Phone and Modem Options > Tab Modems > Pilih modem HP anda > Properties > Tab Driver > Update Driver… > Pilih Install from a list or specific location (Advanced) > Next > Pilih Don’t search. I will choose the driver to install > Next > Have Disk… > Browse… > Cari folder driver modem handphone anda > Open > OK > Next-next aja terus.

Langkah 2

Start > Settings > Control Panel > Phone and Modem Options > Pilih modem anda > Klik Properties > Pilih tab Advanced > Di Extra initialization commands, masukkan Code: AT+CGDCONT=1,”IP”,”Mygprs” > OK

Connection Installation

Start > Control Panel > Network Connections > New Connection Wizard > Next > Connect to the Internet > Next > Set up my connection manually > Next > Connect using a dial up modem > Next > Pilih modem anda > Next > Ketik ‘Mygprs’ > Next > Ketik *99***1# > Next > Ketik di box Username: andalas@mygprs > Ketik di box Password : andalas123> Ketik di box Confirm : andalas123 > Next > Finish

Optimizing Connection

Klik kanan di Mygprs > Properties > Masuk tab Security
> Check “Advanced (Custom Setting) > Klik “Settings” > Check bagian “Allow these protocol” > Hanya check bagian “Unencrypted Password (PAP) > Bagian lain di uncheck > OK

B. Setting Motorola E398/V3/V620/V555

Posisi Layar standby > Lalu Tekan Menu > Pilih Web Access, > Select > Pilih Web Sessions > Select > Pilih New Entry > Select > Lengkapi parameter sbb: > Name : Mygprs > Homepage : http://www.google.co.id (bebas yang penting di isi) > GPRS APN : Mygprs > User Name : andalas@mygprs > Password : andalas123 > (parameter selain diatas tidak perlu dilengkapi atau di rubah) > Tekan Done, setelah terisi lengkap > Pilih Mygprs > Tekan Menu > Pilih Set Default > Select > Tekan Back untuk kembali ke posisi layar standby

C. Setting Sony Ericsson K510

Pilih Menu > Setting > Connectivity > Data Comm. > Data Accounts > New Account > Account Type : GPRS Data > Name : Mygprs > APN : Mygprs > User Name : andalas@mygprs > Password : andalas123 > Pilih Save > Kemudian langkah berikutnya adalah setting internet profile > Pilih Menu > Setting > Connectivity > Internet Settings > Internet Profiles > New Profiles > Name : Mygprs > Connect Using : Pilih Mygprs > Untuk browsing silakan anda pilih Menu > Internet Services > More > Go To > Enter Address > New Address. Silakan URL halaman web yang ingin anda kunjungi misalnya http://www.google.co.id. kemudian pilih Enter. Jika masih gagal membuka halaman web, Silakan anda pilih Menu > Setting > Connectivity > Data Comm. > Data Accounts > Mygprs (Atau koneksi anda), pilih Edit > Authentication > Aktifkan hanya pada pilihan PAP, Kemudian di simpan.

D. Setting Nokia 6600

Pilih Menu > Services > Option > Settings > Default Acces Point > Options > New Access point > Use default settings > SETTING PARAMETER GPRS > Kemudian ubah setiap parameter GPRS dengan rincian sebagai berikut: Connection name : Mygprs > Data bearer : GPRS > Access point name : Mygprs > User name : andalas@mygprs > Prompt Password : No > Password : andalas123 > Authentication : Normal > Homepage : www.google.co.id > Connection Security : off > Session mode – permanent.

E. Setting Nokia 6020

Contoh instalasi modem dan setting koneksi menggunakan Nokia 6020 sebagai modem menggunakan sistem operasi Windows XP SP2. Sambungkan handphone atau gprs modem anda ke komputer, bisa via kabel data, infra red atau bluetooth. Koneksi yang baik adalah menggunakan kabel data USB > Install driver modem dari CD bawaan handphone/gprs modem, jika anda tidak memilikinya, anda bisa download di website pembuatnya atau search di google > Setelah anda memastikan gprs modem driver terinstall sempurna, dengan cara “klik kanan icon My Computer”, pilih properties > Maka akan keluar jendela System Properties > Pilih tab Hardware, klik device manager. Pastikan modem sudah terinstall > Kemudian klik kanan di “Nokia 6020 Modem” > Akan keluar Modem Properties. > Untuk memastikan bahwa modem sudah terisntall dengan sempurna, klik query Modem. > Maka proses pengecekan apakah modem sudah terinstall dengan baik akan dimulai. > Setelah itu klik OK, hingga semua jendela tertutup. Selanjutnya masuk ke desktop. > Klik dua kali My Network Places. > Klik View network connections. > Setelah itu pilih Create a new connection, maka akan keluar New connection Wizard. > Pilih next. > Pilih Connect to the Internet, klik next. > Pilih Set up my connection manually, klik next. > Pilih Connect using a dial up-modem. lalu klik next. > Pilih modem yang anda install tadi, lalu klik next. > Isi ISP Name dengan Mygprs, lalu klik next. > Isi Phone number dengan *99***1#, lalu klik next. > Isi Username dengan : andalas@mygprs, Password dan Confirm password dengan : andalas123, lalu klik next. > Tandai pada kotak Add a shortcut to this connection to my desktop, lalu klik Finish. > Untuk memulai koneksi, klik Dial. Jika komputer sudah terkoneksi, silahkan gunakan untuk browsing, chatting, dan hal lain sesuai kebutuhan anda. Untuk mengakhiri koneksi, klik kanan icon dua komputer di system tray, lalu klik disconect. Untuk memulai koneksi dari awal, klik icon Mygprs di desktop. Maka akan muncul seperti pada langkah yang bergaris bawah diatas. Klik dial, tunggu hingga connect. Untuk pengguna HP Nokia/Sony Ericsson/Motorola/Samsung/dll, lebih mudah jika menggunakan PC suite. Jika anda tidak mempunyai sofwarenya untuk Nokia silahkan download disini (filenya sangat besar sekitar 22MB), untuk Sony Ericsson/Motorola/Samsung/dll silahkan download disini (filenya sangat besar sekitar 48.8 MB) atau lebih baik hubungi customer service Nokia/Sony Ericsson/Motorola/Samsung terdekat untuk mendapatkan copy dari PC Suite. Install PC suite dan driver data kabel, setelah itu anda hanya perlu mengisi APN, username, dan pasword untuk setting di PC/komputer anda, untuk setting di handphone lihat di atas. Yang penting baik setting di handphone atau di PC/Laptop, APN : Mygprs, Username: andalas@mygprs, password: andalas123.

F. Setting Data Card 3G PCMCIA/USB atau PDA Phone

Cara setting sama seperti di atas (lebih simple), klik setting lalu klik network connection setting, isi APN, username, password, dan pilihlah ‘authentication protocolnya ‘PAP’. Beberapa perangkat memiliki ‘default setting’ pada model authentication CHAP, maka anda perlu menggantinya dengan PAP. Setiap perangkat memiliki prosedur yang berbeda untuk mengganti jenis authentication tersebut. Jika anda menggunakan PDA Phone, maka anda dapat mengganti authentication tersebut pada menu ‘GPRS Setting’.

CARA ME-RESET Canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648

To everyone who required resetter for canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 to reset ink counter on these canon printer model, I found how to reset these canon printers model on indoreset. Canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 is canon all in one printer verison that designed for home and small office.

I don’t know this reset method work or not on canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 because I don’t have this printer model to try this reset method.

Ready to reset your printer, follow the following steps:

All these steps must be done to reset your canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 printer.

A. Entering into service mode

  • Turn off the printer off is the printer power on. And remove the printer USB cable from your computer..
  • While the printer is OFF, press and hold the Start/Stop button on the some other canon printers model press Resume/Cancel button.
  • While still holding Start/Stop button or Resume/Cancel button, press and hold the POWER button.
  • When the POWER LED (green light) lit, release the Start/Stop or resume/cancel button (still holding the POWER button).
  • Still holding the power button, Press the Start/Stop button or resume/cancel button TWICE then Release the POWER button. Wait until LCD printer to display 0 (zero) number
  • After the display is 0, attach the printer UDB cable to your computer, its will detected new device installed (its normal), now go to resetting steps

B. Resetting Ink counter on the Printer

  • Run “service_tool 1050.exe”. you can download the service tool software from this link: ServiceTool_1050.zip

  • service tool 1050
  • Confirm detected USB-port numbers on USB port column.
  • Click “Main button” on Clear ink counter section. Make sure there are papers in the paper feed because the printer will print after the process is complete.
  • Click “platen button” on the “Clear ink counter” section. The printer will print again.
  • Turn off the printer and then turn the printer on. You printer is ready for use.

Note: This original tutorial info is from indoreset. No warranty to all risk caused by this tutorial or the software mentioned on this tutorial because it’s just info.